iCAx开思网

标题: wf 2.0 真实发布 [打印本页]

作者: icezf 时间: 2004-4-17 20:39
标题: wf 2.0 真实发布
PTC Releases Pro/ENGINEER[$reg] Wildfire[$#8482] 2.0
New Version of Simple.Powerful.Connected.[$#8482] Solution Delivers 3D Drawings and Interoperability with All Major CAD Systems

NEEDHAM, Mass. April 13, 2004 – PTC (Nasdaq: PMTC), a leading provider of Product Lifecycle Management (PLM) solutions, today announced the availability of Pro/ENGINEER Wildfire 2.0, the newest version of its product design and development solution.  Pro/ENGINEER Wildfire 2.0 offers 3D drawing capability incorporated directly into the core product that is compliant with the industry standard American Society of Mechanical Engineers (ASME) Y14.41. Pro/ENGINEER Wildfire 2.0 also supports interoperability with all the major CAD systems including UGS PLM I-DEAS[$reg], CATIA[$reg] V5 and Unigraphics[$reg] NX.  Additionally, this version delivers major improvements in software usability by extending the Pro/ENGINEER Wildfire User Model to sheet metal, simulation and other areas of the solution. Pro/ENGINEER Wildfire 2.0 is scheduled to ship during PTC’s current fiscal quarter ended July 3, 2004.

Penske Racing, Inc., winner of three straight Indianapolis 500-mile races, has for years used Pro/ENGINEER as its CAD standard. "With Pro/ENGINEER, we have been able to make crucial race-week adjustments; re-designing, manufacturing and delivering revised components to our race teams in a matter of hours," said Tim Cindric, president of Penske Racing, Inc. "

ro/ENGINEER Wildfire 2.0 possesses some key capabilities which will take our skill in executing rapid product refinement to a whole new level."

3D Drawing
PTC’s Pro/ENGINEER Wildfire 2.0 offers 3D drawing capability as part of its core Pro/ENGINEER solution.  Prior to the availability of 3D drawing capabilities, engineers spent large amounts of time creating and/or interpreting drawings for use when product designs were sent to manufacturing to be produced.  Companies using this new capability reduce opportunities for misinterpretation and improve their productivity by eliminating or decreasing reliance on traditional 2D drawings. The new 3D drawing capability was developed in compliance with industry standard ASME Y14.41-2003. The ASME standard is expected to be the basis for an emerging ISO standard to be released within the next year.

“Pro/ENGINEER Wildfire 2.0 offers groundbreaking capabilities that will dramatically improve productivity for users and their organizations,” said Brian Shepherd, senior vice president of product management.  “3D drawings are the perfect blend of the 2D and 3D worlds, allowing downstream users to consult the product model and view all the data they need, annotated directly on the model itself.”

CAD Interoperability
Pro/ENGINEER Wildfire 2.0 introduces facilities for UGS PLM I-DEAS import and associative data exchange capabilities for both the CATIA V5 and UGNX applications, complementing the rich existing set of industry-standard formats and direct application interfaces.

“To compete in aggressive worldwide markets, companies must continually strive for improved efficiency and agility using open solutions that can be configured and deployed to best meet their unique company requirements,” said Dr. Ken Versprille, CPD Associates, LLC (formerly the PLM group of D.H. Brown Associates, Inc.).  “PTC views openness as a fundamental tenet and has consistently provided the highest levels of data interoperability.  Through its comprehensive support for international exchange standards, and its patented associative data exchange technology, PTC delivers an industry-leading open solution with Pro/ENGINEER Wildfire 2.0.”

Adoption
The new release is built upon the award winning technology of Pro/ENGINEER Wildfire, introduced in February 2003.  Pro/ENGINEER Wildfire is being adopted at a remarkable rate.  To date, more than 50 percent of customer sites have made the move -- a result of its immediate accessibility to users of all proficiency levels, its reliability, and its seamless data compatibility with earlier releases of Pro/ENGINEER.

“By CAD industry expectations, Pro/ENGINEER Wildfire has been adopted very rapidly by a large number of PTC’s customers,” said John MacKrell of technology analyst firm CIMData.  “This rapid acceptance of Pro/ENGINEER Wildfire in production environments demonstrates that users recognize the product’s strength in helping improve their product development efficiency.”

Pro/ENGINEER Wildfire 2.0 offers additional enhancements and features that deliver improved software usability across all functional areas.  Learn more about these capabilities at www.ptc.com/go/wildfire

                                                                    ###
About PTC

PTC (Nasdaq: PMTC) develops, markets, and supports software solutions that help manufacturers win with superior products.  PTC is the world’s largest software company with a total commitment to product development and product lifecycle management.  The company services more than 35,000 customers worldwide.  Further information on PTC is available at https://www.ptc.com.

Except for the historical information contained herein, matters discussed in this news release may constitute forward-looking statements that involve risks and uncertainties that could cause actual results to differ materially from those projected. These include: the Company’s finalization of the operating results for the second quarter of fiscal 2004; continued execution of our cost reduction initiatives and our ability to efficiently utilize our resources, minimizing organization disruption while at the same time achieving our revenue targets; continued adoption by customers of our product offerings, including our design solutions products and our Windchill Link solutions; as well as other risks and uncertainties detailed from time to time in reports filed by PTC with the Securities and Exchange Commission, including the Company’s most recent reports on Form 10-K and 10-Q.

PTC, The Product Development Company, Product First, Pro/ENGINEER, Wildfire, Windchill, and all PTC product names and logos are trademarks or registered trademarks of Parametric Technology Corporation or its subsidiaries in the United States and in other countries.

作者: fatten2008 时间: 2004-4-17 21:05
看不懂

作者: 爱你一生 时间: 2004-4-17 21:40
那位高手翻释一下

作者: zls888 时间: 2004-4-17 21:51
really::y::y::y

作者: zls888 时间: 2004-4-17 21:53
如图

作者: udditxihc 时间: 2004-4-17 22:30

作者: kingown 时间: 2004-4-18 10:19

PTC 偶爱你

作者: Toony 时间: 2004-4-21 17:15

作者: qingfeng99 时间: 2004-4-21 17:19
kan

作者: zls888 时间: 2004-4-21 17:21

pp-jack wrote:

[您无权限看这个帖子，您的积分需要大于 18]

pp-jack
Hidden Post: Credits 18

作者: yx6 时间: 2004-4-21 20:28

作者: yf3sd 时间: 2004-4-21 20:30
也太快了点吧。

作者: kevinj 时间: 2004-4-22 00:40
Hodden Post is a piece of SSSSSSSSSSSHHHHHHHHHHHIIIIIIIIIIIITTTTTTTTT

作者: jazzor 时间: 2004-4-22 03:52
是阿!

作者: zagii 时间: 2004-4-22 09:40

作者: yx6 时间: 2004-4-22 10:33

作者: sixer 时间: 2004-4-22 15:01
随便翻了一下，凑和看吧。

感觉主要是提出了3d制图的概念和协同设计功能。
不知道这个3d图纸是个啥样的东东。

PTC Pro/ENGINEER[$reg] Wildfire[$#8482] 2.0 版本发布
新版本
  PTC，PLM解决方案的主要提供商，今天宣布它的产品设计和开发解决方案的最新版本的wildfire2实用性。Wf2提供了符合ASME行业标准y14.41，直接与核心产品集成一体化的3d制图功能。Wf2同时支持与所有专业cad系统包括UGS PLM I-DEAS[$reg], CATIA[$reg] V5 and Unigraphics[$reg] NX的协同工作能力。另外，这个版本通过将用户模型扩展到钣金、仿真和其他领域的解决方案进行了专业的改进，来提高软件的可用性。Wf2预定在ptc的于2004年7月3日结束的当前财政季度推出。
  Penske Racing公司是三届500英里赛事的冠军，他们已经将proe作为CAD标准使用了很多年。“通过pro/e，我们已经能够进行关键的赛事周调整，在大约几个钟头内进行重新设计，制造，向我们的竞赛队伍提供修正后的零件。”wf2拥有一些关键的功能可以使我们的技能在完成快速产品的精致程度带到一个完全新的水平。
3D 制图
作为ptc pro/e的核心解决方案的一部分， wf2 提供了3d制图功能。在3d制图功能成为可能之前，产品的设计被送交制造商进行生产时，工程师们往往花费了大量的时间来制作或注释图纸来使用。公司通过使用这种新功能可以减少误解的机会，通过消除或减少对传统的2d图纸的依赖，以提高他们的生产力。新的3d制图功能依照行业标准ASME Y14.41-2003开发。ASME标准有望成为在下一年发布的一种ISO标准的基础。
  “pro/e wf2提供了groundbreaking功能可以引人注目地提高用户和他们组织的生产力。”产品管理的高级副总裁Brian Shepherd说，“3d图纸是2d和3d世界的最佳混和，允许下游的用户参与商议产品模型以及参看他们所需要的所有直接在模型本身上的数据。”
  CAD协同工作能力
wf2引进了针对UGS PLM I-DEAS输入的工具，以及为CATIA V5 and UGNX相关数据交换功能，补充现有充足的一套行业标准格式和直接应用程序接口。
在世界范围市场竞争中，公司必须不断奋斗提高效率和敏捷性，使用开放的解决方案来设定和配置来达到最佳的的独特的公司需求。LLC的CPD同事Dr. Ken Versprille说，PTC把开放看作一个基本的原则，并且一贯地提供最高水平的数据协同工作能力。通过它对国际交换标准的广泛的支持，它的有专利的相关的数据交换技术，ptc通过wf2发布了一种行业领导的开发解决方案。
Adoption
新版本发布建立在2003年2月引进的wf技术获胜的基础上。Wf正在以不平常的速率被接受。作为能很快使用户达到全部的精通水平，它的可靠性，以及与早期版本的无缝数据功能的一种结果，到现在，已经有超过50%的用户立场发生转变。
鉴于CAD行业的期望，pro/e wf已经很快的被大量的ptc用户所接纳。John说，这种在生产领域对wf快的接受证明用户意识到在帮助提高他们产品发展效率方面的实力。
  wf2 在所有的功能范围内进行软件的可用性改进，提供了另外的增强功能和特征。了解更多的这些功能，请浏览www.ptc.com/go/wildfire

作者: jiao 时间: 2004-4-22 15:12
热切期盼2.0的推广

作者: fjjklmx886 时间: 2004-4-22 16:11
哪裡有這個賣啊,

作者: lb2004 时间: 2004-4-22 17:38
我感到有点烦。
刚能适应proe2001就出现了pf.
现在还没来得及用好2001呢。又要pf2.0了。马拉松啊。

作者: linguoqing_nb 时间: 2004-4-22 17:53
期待2.0!!!!!!!

作者: pro/e wildfire 时间: 2004-4-22 17:59
呵呵！已经用上了！

Pro/ENGINEER Wildfire 2.0 Datecode F000 (2004110)

作者: cej410 时间: 2004-4-23 10:06

pro/e wildfire wrote:
呵呵！已经用上了！
  
  &nbspro/ENGINEER Wildfire 2.0 Datecode F000 (2004110)

有地方下载吗？兄弟？

作者: kim_huang 时间: 2004-4-23 11:47
買不到啊,心酸!

作者: AHTHCWG 时间: 2004-4-23 14:17

作者: boby 时间: 2004-4-23 14:53
请各位小心，遵守规则

欢迎光临 iCAx开思网 (https://www.icax.net/)