iCAx开思网

标题: 请教后处理修改 [打印本页]

作者: cat0254 时间: 2005-12-30 16:06
标题: 请教后处理修改
请教一下高手，如果用法朗克后处理，然后我想让机器只读Ｇ０１的指令，其他的不能读的话要怎么修改呢＞？

作者: seefon 时间: 2006-1-2 02:10
是不是这样的啊？

%
; N100 (PROGRAM NAME -  24WEI .PIM )
; N110 (DATE=DD-MM-YY -  07-12-05  TIME=HH:MM -  19:40 )
; N120 ( TOOL-5  DIA.OFF.-45  LEN.OFF.-5  DIA.-20.  COR.RAD.-0. )
N130 S2500 M3
N140 G04K500
N150 G53 G0 Z-1
N160 G51 E0.01
N170 G71
N180 G54
N190 G17 G90
N200 G0 X15.195 Y-66.226
N210 Z50.
N220 Z10.
N230 G1 Z0. F250.
N240 Y-46.226 F1000.
N250 X15.193 Y-45.946
N260 X15.187 Y-45.665
N270 X15.177 Y-45.385
N280 X15.164 Y-45.105
N290 X15.146 Y-44.825
N300 X15.124 Y-44.545
N310 X15.099 Y-44.266
N320 X15.069 Y-43.987
N330 X15.036 Y-43.708
N340 X14.999 Y-43.43
N350 X14.957 Y-43.153
N360 X14.912 Y-42.876
N370 X14.863 Y-42.6
N380 X14.811 Y-42.324
N390 X14.754 Y-42.049
N400 X14.694 Y-41.776
........
N5710 X-24.797 Y-45.665
N5720 X-24.803 Y-45.946
N5730 X-24.805 Y-46.226
N5740 Y-66.226
N5750 G0 Z50.
N5760 M5
N5770 G53 G0 Z-1
N5780 M09
N5790 M30

欢迎光临 iCAx开思网 (https://www.icax.net/)