iCAx开思网

标题: help!GE FANUC 16i-t 后处理程序! [打印本页]

作者: richard8888 时间: 2006-6-14 19:34
标题: help!GE FANUC 16i-t 后处理程序!
各位大哥,帮忙写一个GE lathe FANUC 16i-T的后处理程序,感谢!!

NC code 如下:
%
0892
N10G20G90G95G97M43
N20G40G92S80
N30G54
N40G04T0800
G50G00X35.Z5.
N60G04T0808
N70G00X35.Z5.
N80G96S300M3P1
N90X10.488Z.1
N100G01G42X10.0887F.008
N120Z0.
N130X10.2388Z-.13
N140Z-5.9962
N150X10.2236Z-6.0392
N160G02X10.46Z-6.18R.12
N170G01X11.6F.01
N180X11.63W-.015
N190Z-6.31
N200G02X12.13Z-6.56R.25
N210G01X12.4643
N220X12.753Z-6.81
N230Z-8.8993F.008
N240G02X14.727Z-10.06R1.
N250G01X28.3F.012
N260G00G40X35.Z1.
N270G04T0800
N280G90X40.Z20.M5
N290M30
%

PLEASE e-mail to:richardzhang99@gmail.com thanks lot!

作者: cxmhee 时间: 2006-6-18 00:29
车削我们不懂的,帮不了你,不好意思,兄弟.

欢迎光临 iCAx开思网 (https://www.icax.net/)