iCAx开思网

标题: 怎样修改MPFAN.PST有余量? [打印本页]

作者: 陈永杰 时间: 2006-11-27 14:04
标题: 怎样修改MPFAN.PST有余量?
请问高人:怎样修改MPFAN.PST可输出余量格式?
还有怎样做到以下的格式:
N106  Z30.
N108  Z21.
N110  G1  Z6.  F1000.
原来的格式是:
N106Z30.
N108Z21.
N110G1Z6.F1000.
多谢

作者: rocklgc 时间: 2007-4-4 18:29
# --------------------------------------------------------------------------
fmt "TOOL - "    4 tnote    # Note format
fmt " DIA. OFF. - " 4 toffnote # Note format
fmt " LEN. - "    4 tlngnote # Note format
fmt " D= "    1 tldia    # Note format
fmt " R= "       1 tcr       # Note format
fmt "XY=  "       2  xy_stock # Assign an output format
fmt "Z = "          2  z_stock # Assign an output format
# --------------------------------------------------------------------------
"(TOOL NAME:", pstrtool, *tnote, *toffnote, *tlngnote, *tldia, *tcr ")", e
"(STOCK:",~xy_stock," ",~z_stock,")",e
--------------------------------------------------------------------------
# XYZ Stock setting
# --------------------------------------------------------------------------
pparameter    #Information from parameter

#Capture parameter values
if prmcode  =10010,  xy_stock = rpar(sparameter, 1)
if prmcode  =10068,  z_stock = rpar(sparameter, 1)

# --------------------------------------------------------------------------
1501. Insert parameter information in the ascii NCI? y
1502. Write operation information to binary file (.ops)? y

作者: songhaitao 时间: 2007-4-4 19:42
顶一下

作者: hover08ms 时间: 2007-4-4 20:42
顶二楼的兄弟～

作者: hdymzly 时间: 2007-4-4 21:43
不懂，正在学习

作者: 2008cnc 时间: 2007-5-14 22:20
谢谢二楼的兄弟了，我也懂点修改后处理的东东，你又让我开了开眼界！

作者: boy9981 时间: 2007-5-15 08:18

原帖由 陈永杰 于 2006-11-27 14:04 发表
请问高人:怎样修改MPFAN.PST可输出余量格式?
还有怎样做到以下的格式:
N106  Z30.
N108  Z21.
N110  G1  Z6.  F1000.
原来的格式是:
N106Z30.
N108Z21.
N110G1Z6.F1000.
多谢

改 spaces : 0 #Number of spaces to add between fields
为 spaces : 1 #Number of spaces to add between fields

作者: 飞雁笑 时间: 2007-5-15 09:24
值得学一下!

作者: zhuifengxiaV70 时间: 2007-5-15 09:42
还望大侠告之小弟怎么用，
小弟刚学，这个问题我也想知道急呀
谢谢

作者: zhuifengxiaV70 时间: 2007-5-15 09:43
# --------------------------------------------------------------------------
fmt "TOOL - "    4 tnote    # Note format
fmt " DIA. OFF. - " 4 toffnote # Note format
fmt " LEN. - "    4 tlngnote # Note format
fmt " D= "    1 tldia    # Note format
fmt " R= "       1 tcr       # Note format
fmt "XY=  "       2  xy_stock # Assign an output format
fmt "Z = "          2  z_stock # Assign an output format
# --------------------------------------------------------------------------
"(TOOL NAME:", pstrtool, *tnote, *toffnote, *tlngnote, *tldia, *tcr ")", e
"(STOCK:",~xy_stock," ",~z_stock,")",e
--------------------------------------------------------------------------
# XYZ Stock setting
# --------------------------------------------------------------------------
pparameter    #Information from parameter

#Capture parameter values
if prmcode  =10010,  xy_stock = rpar(sparameter, 1)
if prmcode  =10068,  z_stock = rpar(sparameter, 1)

# --------------------------------------------------------------------------
1501. Insert parameter information in the ascii NCI? y
1502. Write operation information to binary file (.ops)? y

我怎么改都出错功力不够

作者: 默涵 时间: 2007-5-15 22:16
顶一下

欢迎光临 iCAx开思网 (https://www.icax.net/)