iCAx开思网

标题: 请教一个COSMOSWORKS问题 [打印本页]

作者: zyd-ysf 时间: 2002-1-26 20:58
标题: 请教一个COSMOSWORKS问题
    我向大家请教一个COSMOSWORKS的问题，如何在一个很不规则的曲面上施加压力随着位置变化的负载条件？
    其它的，如DESIGNSPACE或VISUAL NASTRAN（都没有用过）可以加这样的负载吗？
    谢谢！

作者: aggie 时间: 2002-1-27 09:00
you can't make it in cosmos/works. but you can do it in Cosmos/M, Ansys etc. FEA softwares. However, you have to apply pressure on elements.

作者: zyd-ysf 时间: 2002-1-27 10:56

aggie wrote:
you can't make it in cosmos/works. but you can do it in Cosmos/M, Ansys etc. FEA softwares. However, you have to apply pressure on elements.

  Thank you for your anwser.once I tried to realize this problem in ANSYS5.5. But it is not easy.especially, how to capture and re-orient face element which is within the volume element. Can you give me further informative tutor in ANSYS or Cosmos/M.

作者: zyd-ysf 时间: 2002-1-30 11:33

zyd-ysf wrote:
[quote]aggie wrote:
you can't make it in cosmos/works. but you can do it in Cosmos/M, Ansys etc. FEA softwares. However, you have to apply pressure on elements.

作者: zlz1976 时间: 2002-1-30 12:34
呵呵！COSMOS没用过，在I-DEAS中可以用数据面，加变载荷！

欢迎光临 iCAx开思网 (https://www.icax.net/)