iCAx开思网

标题: 请问大家在CAA里边怎么用SheetMetal的下的操作？ [打印本页]

作者: rongtiannuaa 时间: 2008-7-15 21:54
标题: 请问大家在CAA里边怎么用SheetMetal的下的操作？
请问大家在CAA里边怎么用SheetMetal的下的操作？CAA自带的帮助文件里的CATIAerospaceSheetMetalFactory 接口无法显示，因此不知道怎么用，请高手指点一二，不胜感激。

作者: yuhuimoon 时间: 2011-12-17 23:34
发你个在线帮助链接：
https://www.maruf.ca/files/caadoc/CAAAerospaceSheetMetalUseCases/CAAStmWeb.htm

作者: yuhuimoon 时间: 2011-12-17 23:37
Method Index

1. CreateJoggle(CATISpecObject*,CATISpecObject**)
Role: This method creates a Joggle Feature.

2. CreateSurfacicFlange(CATISpecObject*,CATISpecObject**)
Role: This method creates a Surfacic Flange Feature.

3. CreateWeb(CATISpecObject*,CATISpecObject**)
Role: This method creates a Web Feature.

Methods
o CreateJoggle

public virtual HRESULT __stdcall CreateJoggle(	const CATISpecObject*	ipiPartSpec,
	CATISpecObject**	opiJoggleSpec) = 0

Role: This method creates a Joggle Feature. Parameters: ipiPartSpec the Part Feature in which the Joggle will be inserted. opiJoggleSpec the created Joggle Feature. o CreateSurfacicFlange

public virtual HRESULT __stdcall CreateSurfacicFlange(	const CATISpecObject*	ipiPartSpec,
	CATISpecObject**	opiSurfacicFlangeSpec) = 0

Role: This method creates a Surfacic Flange Feature. Parameters: ipiPartSpec the Part Feature in which the Surfacic Flange will be inserted. opiSurfacicFlangeSpec the created Surfacic Flange Feature. o CreateWeb

public virtual HRESULT __stdcall CreateWeb(	const CATISpecObject*	ipiPartSpec,
	CATISpecObject**	opiWebSpec) = 0

Role: This method creates a Web Feature. Parameters: ipiPartSpec the Part Feature in which the Web will be inserted. opiWebSpec the created Web Feature.

This object is included in the file: CATIAerospaceSheetMetalFactory.h
If needed, your Imakefile.mk should include the module: CATSmaInterfaces

欢迎光临 iCAx开思网 (https://www.icax.net/)