iCAx开思网

标题: 【分享】【原创】常用工程图问题的设置 [打印本页]

作者: baojian 时间: 2002-6-8 11:01
标题: 【分享】【原创】常用工程图问题的设置
!下面3项控制工程图文本字高、字体笔宽和字体宽度因子
drawing_text_height          2.200000
text_thickness                0.000000
text_width_factor             0.80000
!==================================================
! These options control views and their annotations
!下面这些选项控制视图和它们的注释
!==================================================
broken_view_offset          1.000000
create_area_unfold_segmented YES
def_view_text_height          2.500000
def_view_text_thickness       0.000000
detail_circle_line_style    SOLIDFONT
detail_view_circle          ON
half_view_line                SOLID
!half_view_line                SYMMETRY
!
projection_type             THIRD_ANGLE
!set 1st angle projection,set projection_type FIRST_ANGLE
!
show_total_unfold_seam       YES
!----------------------------------
!==Set the scale format===
!Scale format:SCALE x.000 please set
!下面这项设置VIEW的比例分母:
!view_scale_denominator       0
!view_scale_format          decimal
!The following is scale format SCALE X:Y
!
view_note                   STD_ANSI
!Also can set View_Note:STD_ISO,STD_DIN,STD_JIS
view_scale_denominator       10
view_scale_format             RATIO_COLON
!scale format SCALE x/y should set view_scale_format FRCTIONAL
!

欢迎光临 iCAx开思网 (https://www.icax.net/)