iCAx开思网

标题: 【资料】关于plot（绘图）命令的详细中文解释 [打印本页]

作者: duanxz 时间: 2002-7-25 20:49
标题: 【资料】关于plot（绘图）命令的详细中文解释
Plot（绘图）命令的详细解释：

概论：
The File—>

lot option allows you to create Generic Plot Data Files that
File->

lot 选项允许你建立普通绘图数据文件并把它输出到TCP/IP网络中任意一台绘图服务器的任意一个打印队列中，打印队列自身跟特定的绘图设备有关
，将最终接受并绘出UG图型。

文件绘图选项：

1）绘图队列节点
列出了可以从当前节点中得到的绘图阵列。你能通过敲击鼠标左健在列出的选项中选择一个绘图队列。
2）工作清单
当前工作显示在从绘图队列清单中选择的绘图队列中。
3）改变绘图服务器
如果缺省服务器不符合要求可另换其它服务器。
4）显示或制图的选择
选择显示，输出当前的全部图形；
选择制图，使用存在的制图建立绘图文件。
5）制图清单
列出了你能选择的现有视图（如果你建立了制图绘图文件）
6）制图缺省值
可重新得到、保存或列出从制图清单选择的绘图缺省值
7）笔的分配模式
定义绘图笔的分配模式
选项：宽度、颜色、颜色-自定义调色板
a)笔的分配
指定笔号大小
b)比例
比例确定输出零件的大小
c)旋转
改变绘图的方向，旋转的测量单位为度。

今天到此为止，下文待续。

Banner Options

  Places a text block of information about a specific plot directly onto the same paper that is to receive your plot geometry.

Selections: No banner ; Default banner ; Prompt for banner

Plot Setup
  Specifies the accuracy of curves in the plot.

Origin Offsets
  Origin is the point on the part or drawing associated with the starting position of the plotter pen. On some plotters, if the origin is not selected correctly, the plotter will hang, and the only way to clear it is to bring down the associated plot despooler.

Options
  Specifies the plot media, number of copies, the name of the plot job, the text for a pause message, and whether the plot file should be saved, deleted, or released to the plotter.

Build Plot File
  Builds the plot file. Select this option after defining the other options on the Plot dialog.


Your system manager will have configured your plot server (or servers), and created queues for each. Note that your plot server might be any Unigraphics node (or nodes) on your network. Plot servers are not necessarily the same nodes as File Servers, License Servers, or any other specific server nodes that may be available.

More than one Plot Queue may resolve to the same plotter device. Consult your system manager as to what queues produce results for your specific plotters.

Creating a plot file and a resultant plot require the following:

Selecting a Plot Server

Selecting a Plot Queue

Selecting Geometry to Plot

Defining Plot Parameters

Releasing the Plot Data File to its Queue

Selecting a Plot Server
Choosing File—>

lot displays the Plot dialog, which shows the currently selected plot server. This will be either the last plot server selected, or the default plot server, as assigned by your system manager. Normally you will not need to select a plot server unless the default server is undesired.

If you wish to change plot servers, choose the Change Plot Server button on the Plot dialog. This button presents you with a new dialog box allowing you to specify a new plot server node. On specifying a new server node name or network address, the queue list box is updated with a list of queues available on the newly selected server.

If for some reason Unigraphics is not able to connect to the newly selected plot server; the following message is displayed:

Configured plot server is inactive. Enter alternate plot server or contact system manager.
Selecting a Plot Queue
On selecting an active plot server, a list of available plot queues is displayed. You can select plot queues simply by clicking on the queue name. Each time you reenter the plot dialog, the last selected queue becomes the default.

To list the plot jobs waiting within a plotter's queue, select the List Jobs option. Another list box displays information on the jobs in the selected queue.

The plotter associated with a given queue may be either on- or off-line.

Selecting Geometry to Plot
After choosing the plot queue, designate the source for your plot. You have two choices: Display or Drawing.

Display
The Display option plots everything in the current graphics display. The display may contain drawings as well as views.

You may also plot a zoomed area of a drawing. In this case, you plot by display, but you are viewing a drawing. The plot will contain the contents of the display, clipped at the view bounds.

  NOTE: If the X-Windows driver (xwimod) is being used, Regenerate the work view after zooming, and prior to plotting.

When you choose Display, corresponding tool paths are also plotted, along with other displayed objects, if a Cutter Location Source File (CLSF) is active.

Drawing
The Drawing option allows you to build a plot file using an existing drawing. After choosing the Drawing button, you can select an existing drawing or several drawings (by holding down Ctrl or Shift buttons while selecting) from the listing box. Selecting a single drawing retrieves default plot parameters for that drawing. New drawings initially use the default plot parameters pre-defined in your ug_metric.def or ug_english.def file.

Saving, Retrieving, and Listing Drawing Defaults
After selecting a drawing from the listing box, you are given the option to Retrieve, Save, or List the drawing defaults for that selected drawing. The Retrieve button allows you to retrieve the stored default plot parameters for a selected drawing. Plot parameters are settings that affect plotter pen assignments, the rotation of the plotted drawing, the scale of the plotted drawing, plot tolerances, banner options, and plot origin offsets.

Should you wish to modify any default plot parameters and wish to store those parameters with the drawing, click the Save button after updating your plotting parameters.

To list the stored default plot parameters, click the List button.

Listing Plot Parameters

  NOTE: If you have selected several drawings from the list, then you will not be able to Retrieve, Save, or List the drawing defaults and to set up plot parameters. The stored default plot parameters for each drawing will be used when plotting several drawings.

作者: towtow 时间: 2002-7-26 20:43
请继续啊大哥!我公司的是HP450C,在另一台计算机上的,我打印的时候选择此计算机出现了7个打印队列,但是没有HP450C,怎么会这样的??无论如何PLOT床单中都搞不出来让我OK的选项,都是灰色的,怎么解决呢?

作者: dchui 时间: 2006-8-21 20:13
shangmian de da ge meiyou shezhi UG de Plot gong neng

欢迎光临 iCAx开思网 (https://www.icax.net/)