iCAx开思网

标题: 后处理怎实现备刀！ [打印本页]

作者: jj109200 时间: 2014-6-10 21:40
标题: 后处理怎实现备刀！
怎么实现GPP2后处理备刀啊？
就是
T2M6
T3
G90G54G0X0Y0
G40G80G17G49
G43H2Z50.
......

作者: zhouhui920 时间: 2014-6-11 21:09
后面那个T3不就是备刀了么？
要是没用试试不要在M06后面

作者: zbhouin 时间: 2014-6-11 23:23
FORMAT (TOOLS) DiaComp LengthComp NextTool;

NextTool = NEXT_TOOL(TOOL_NUM);
IF (NextTool != TOOL_NUM)
   tmpString = "Next Tool: " + NEXT_TOOL(TOOL_NAME)
                  + " D= " + STR_FORMAT(NEXT_TOOL(DIAMETER_))
                  + " R= " + STR_FORMAT(NEXT_TOOL(TOOL_RAD));
  OUTPUT $ " T" NextTool " (" tmpString ")";  END_IF;
  LengthComp = TOOL_NUM;
  DiaComp  = TOOL_NUM + CutComDiaDelta;

作者: tentium989 时间: 2014-6-25 20:03

zbhouin 发表于 2014-6-11 23:23
FORMAT (TOOLS) DiaComp LengthComp NextTool;

會寫程式碼的人都好利害...旺塵莫及

作者: 新润泰CNC 时间: 2014-6-27 19:52
勤快点，自己在后面自己加

欢迎光临 iCAx开思网 (https://www.icax.net/)