iCAx开思网

标题: Sw2014生成eDrawing，表格存在的问题。 [打印本页]
作者: ning58    时间: 2014-10-6 12:24
标题: Sw2014生成eDrawing，表格存在的问题。
采用Solidworks生成eDrawing出现问题如下。
[attach]1208006[/attach]


同一文件采用Sw2013生成eDrawing，表格生成就没问题。

[attach]1208005[/attach]
作者: ning58    时间: 2014-10-6 16:04
本帖最后由 ning58 于 2014-10-6 16:25 编辑

感觉是计算机硬件有问题
由于计算机硬件配置低，勉强安装32位系统的sw2014版本。

[attach]1208022[/attach]
***************************************
       
电脑型号        宏碁 AO521 笔记本电脑
操作系统        Windows 7 旗舰版 32位 SP1 ( DirectX 11 )
       
处理器        AMD Athlon(速龙) II Neo K125
主板        宏碁 JV01-NL (AMD 760G/780G/780V/785G/790GX/880G/890GX)
内存        2 GB ( 三星 DDR3 1333MHz )
主硬盘        西数 WDC WD1600BEVT-22A23T0 ( 160 GB / 5400 转/分 )
显卡        ATI Mobility Radeon HD 4200  ( 336 MB / 宏碁 )
显示器        LG LGD026E LP101WSB-TLN1 ( 10.1 英寸 )
声卡        Conexant SmartAudio HD @ ATI IXP SB600/SB700/SB800 高保真音频
网卡        鈺硕 AR8152 PCI-E Fast Ethernet Controller / 宏碁

****************************************
低配计算机硬件，强制安装Sw2014，

Solidworks 另存edrawing极易出现Solidworks系统崩溃现象。
错误报告如下：
************
; SolidWorks generated log file - do not edit.
<VERSION> 4</VERSION>
<ROC_NUM>1 system processor(s)
<ROC_ARCH>0, 16, 1539
<OS>Microsoft Windows 7 Ultimate Edition, 32-bit 6.1 Service Pack 1 (Build 7601)
<MACHINE>ACER
<SERIAL>0001 0001 0736 0361
<INSTALLER>2
<SPEED_MEM>1695MHz  1877262336  1187373056 64424509440  1739673600
<ROCESSOR> 1 "x86 Family 16 Model 6 Stepping 3" "AuthenticAMD"
<DOTNET> 2.0.50727.5420
<DOTNET> 3.0.30729.5420
<DOTNET> 3.5.30729.5420
<VERSIONDATESTAMP>22/2013262</VERSIONDATESTAMP>
<S>
<ST>1412579081
<BUILD>SP0.0 SP0.0
<HOTFIX>None
<INTERNALSWVERSION>d130920.001
<EXEDIR>C:\Program Files\SolidWorks2014 Corp\SolidWorks
<X64> 0 0
<ADDIN> FeatureWorksisabled SldTrans 1.0isabled SldUg 1.0isabled SolidWorks 2D Emulatorisabled SolidWorks DXF3Disabled SolidWorks HCG:Disabled SolidWorks HSF:Disabled SolidWorks Inventor:Disabled SolidWorks JPEG:Disabled SolidWorks MDT:Disabled SolidWorks MTS:Disabled SolidWorks Pro/E:Disabled SolidWorks Routing:Disabled SolidWorks SE:Disabled SolidWorks Toolbox:Disabled SolidWorks Toolbox Browser:Disabled SolidWorks Utilities:Disabled SolidWorks Motion:Disabled SolidWorks Simulation:Disabled
<REALVIEW> 0
<MSIE>8.0.7601.17514
<LANGUAGE> chinese-simplified,chinese-simplified,2052
<CMDLINE> 0,0,0,0,0,0,1,0,0,0,0,0,0,1,-1,0,0,0,0,0, 0
<KGTYPE> 2
<FDBK_OP-IN> 0 </FDBK_OP-IN>
<SWSID> "20141006150417_22.0.0.5018" </SWSID>
<FVI>CMD:"excel.exe" ATTR:Detected=1 ATTRN="Microsoft Office 2003" ATTRV="11.0.5612" ATTR:FV="11.0.5612"</FVI>
<FVI>CMD:"winword.exe" ATTR:Detected=1 ATTRN="Microsoft Office 2003" ATTRV="11.0.5604" ATTR:FV="11.0.5604"</FVI>
<FVI>CMD:"outlook.exe" ATTR:Detected=1 ATTRN="Microsoft Office Outlook" ATTR:PV="11.0.5510" ATTR:FV="11.0.5510"</FVI>
<FVI>CMD:"iexplore.exe" ATTR:Detected=1 ATTR:PN="Windows<SWINSTALL>ATTR:PN="SolidWorks 2013 Chinese Simplified Resources" ATTR:PV="21.120.50" ATTR:MajV=21 ATTR:MinV=120</SWINSTALL>
<SWINSTALL>ATTR:PN="SolidWorks 2013 SP02" ATTR:PV="21.120.50" ATTR:MajV=21 ATTR:MinV=120</SWINSTALL>
<SWINSTALL>ATTR:PN="SolidWorks 2014 Chinese Simplified Resources" ATTR:PV="22.100.5018" ATTR:MajV=22 ATTR:MinV=100</SWINSTALL>
<SWINSTALL>ATTR:PN="SolidWorks 2014 SP0" ATTR:PV="22.100.5018" ATTR:MajV=22 ATTR:MinV=100</SWINSTALL>
<AD2> "LOAD_ADDIN" "fworks.dll" "" [0.08] "22.0.0.5018" 10 COM.old 1379755031 1
<LAST_BOOT_TIME>ATTR:time=10/06/2014 14:57:10 ATTR:GMTOffset=+08:00</LAST_BOOT_TIME>
<AD2> "LOAD_ADDIN" "SwLoaderSw.dll" "" [0.66] "22.0.0.5018" 10 COM.old 1379755238 2
<AD3>CMD:OLD_STYLE_ADDIN_OVERRIDE=0</AD3>
<AD2> "LOAD_ADDIN" "3dviasolidworksplug-in.dll" "SolidWorks Composer" [6.93] "6.12.2.2521" 9 COM.new 1378773607 3
<AD2> "LOAD_ADDIN" "Dsgnchku.dll" "SolidWorks Design Checker" [0.73] "22.0.0.5018" 10 COM.new 1379755772 4
<GRAPHICS> cdd V4.01 X1024 Y768 32 bits 60Hz
<ON>:ATI Technologies Inc.
<OR>:ATI Mobility Radeon HD 4225
<OV>:3.3.10600 Compatibility Profile Context
<V>:8.14.01.6195
<PN>:Advanced Micro Devices, Inc PowerXpress Vista OpenGL Driver
<CN>:Advanced Micro Devices, Inc.
<FD>:atiglpxx.dll
<LC>:Copyright (C) 2007 Advanced Micro Devices, Inc.
<FV>:8.14.01.6195
<COMPUTERSYSTEMINFO>ATTR:Manufacturer=Acer ATTR:Model=AO521</COMPUTERSYSTEMINFO>
<VIDEOCONTROLLERINFO>ATTR:AdapterCompatibility=ATI Technologies Inc. ATTR:Description=ATI Mobility Radeon HD 4225 ATTR:DriverVersion=8.830.0.0 ATTR:PNPDeviceID=PCI\VEN_1002&DEV_9712&SUBSYS_043D1025&REV_00\4&3D93A17&0&2808</VIDEOCONTROLLERINFO>
<AD2> "LOAD_ADDIN" "mscoree.dll" "SolidWorks Forum 2014" [0.81] "4.0.40305.0" 0 COM.new 0 5
<SW EXIT>Upper-Right "X" click</SW EXIT>
<PROCMEM> CMD:AppRunTime ATTR:PageFileBytes=192327680 ATTR:PageFileBytesPeak=196120576 ATTR:PoolNonpagedBytes=64236 ATTR:PoolPagedBytes=1533468 ATTR:PrivateBytes=192327680 ATTR:VirtualBytes=932581376 ATTR:VirtualBytesPeak=961163264 ATTR:WorkingSet=270041088 ATTR:WorkingSetPeak=274124800 ATTR:AvailableReservesMask=7 ATTR:GDIHandlesTotal=10000 ATTR:GDIHandlesUsed=821 </PROCMEM>
<PROCMEM> CMD:AppRunTime ATTR:PageFileBytes=192520192 ATTR:PageFileBytesPeak=196120576 ATTR:PoolNonpagedBytes=64176 ATTR:PoolPagedBytes=1532956 ATTR:PrivateBytes=192520192 ATTR:VirtualBytes=932581376 ATTR:VirtualBytesPeak=961163264 ATTR:WorkingSet=269479936 ATTR:WorkingSetPeak=281190400 ATTR:AvailableReservesMask=7 ATTR:GDIHandlesTotal=10000 ATTR:GDIHandlesUsed=821 </PROCMEM>
<CD>=6 57664 0
<*CD>[4.09]
<CD>=4 51573 0
<*CD>[3.85]
<CD>=4 57616 0
<*CD>[0.00]
<CD>=4 51573 0
<*CD>[5.82]
<AD2> "LOAD_ADDIN" "sldfuncfeat.dll" "sldFuncFeat" [0.28] "22.0.0.5018" 10 COM.new 1379766432 6
<DOC_OPEN> ".SLDASM" 0, 0, 1, 1, 3, 0
<PROCMEM> CMD:DocOpen ATTR:PageFileBytes=205004800 ATTR:PageFileBytesPeak=205008896 ATTR:PoolNonpagedBytes=68976 ATTR:PoolPagedBytes=1605788 ATTR:PrivateBytes=205004800 ATTR:VirtualBytes=990294016 ATTR:VirtualBytesPeak=990298112 ATTR:WorkingSet=292597760 ATTR:WorkingSetPeak=292597760 ATTR:AvailableReservesMask=7 ATTR:GDIHandlesTotal=10000 ATTR:GDIHandlesUsed=1006 </PROCMEM>
<EVENT> [EVT_SWITCH_TO_ASSEMBLY]
<CD>=8 33021 0
<PROCMEM> CMD:AppRunTime ATTR:PageFileBytes=283095040 ATTR:PageFileBytesPeak=303316992 ATTR:PoolNonpagedBytes=78036 ATTR:PoolPagedBytes=1751420 ATTR:PrivateBytes=283095040 ATTR:VirtualBytes=1178845184 ATTR:VirtualBytesPeak=1183715328 ATTR:WorkingSet=387510272 ATTR:WorkingSetPeak=390578176 ATTR:AvailableReservesMask=7 ATTR:GDIHandlesTotal=10000 ATTR:GDIHandlesUsed=1361 </PROCMEM>
<*CD>[1093.63]
<CD>=13 34097 0
<CD>=4 57604 0
<*CD>[34.40]
<CD>=13 34097 0
<CD>=4 57604 0
<SWEXH>
<MINIDUMP> "eb6698b8-4c5c-4b25-8825-5f965c9e9ff2" </MINIDUMP>
<EXCEPTION> "Access Violation at 09afcf01 (virtual address 18f31000), attempt to read from memory"
<RESOURCE_WARNING>CMD:GDIHandles ATTR:used=1401 ATTR:load=14.01 ATTR:free=8599 CMD:CommitChargeMB ATTR:used=1878 ATTR:load=52.45 ATTR:free=1702 CMD:ProcessMemMB ATTR:used=1096 ATTR:load=53.53 ATTR:free=951</RESOURCE_WARNING>
<AD5> auModelView_c::RepaintNotify;auAm_c::XDispatch::get_IActiveDoc2;auModelView_c::RenderLayer0Notify;auModelView_c::BufferSwapNotify;auModelView_c::GraphicsRenderPostNotify;auModelView_c::RepaintPostNotify;auAssemblyDoc_c::FileSaveAsNotify;auModelView_c::RepaintNotify;auAm_c::XDispatch::get_IActiveDoc2;
<RAWSTACK> atioglxx:09AFCF01:0004CF01,USER32:76D9C204:0000C204;
<UNHANDLED>
</SWEXH>




欢迎光临 iCAx开思网 (https://www.icax.net/) Powered by Discuz! X3.3