UG NX3后处理器

三菱富士通3轴，没有刀库
格式如下：
%
(MILL_8S D=8.0 R=0.0)
G90G17G00G40G49G80
G54
G00X58.554Y97.163S2000M03
Z10.
Z3.
G01X58.508Y96.88Z2.985F250.M08
X58.304Y96.156Z2.946
X59.135Y96.155Z2.902
X59.136Y103.849Z2.499
X58.3Y103.848Z2.455
X58.467Y103.254Z2.423
X58.581Y102.647Z2.39
X58.722Y101.908Z2.351
X39.579Y55.045
X40.377Y55.74
G02X49.699Y55.108I4.294J-5.734
X49.762Y55.045I-5.028J-5.102
X50.222Y45.467I-5.091J-5.045
X49.647Y44.841I-5.547J4.525
X46.762Y43.144I-4.972J5.151
X39.38Y45.168I-2.098J6.822
G01X39.376Y45.17
G03X40.122Y42.274I5.993J-.001
G01X40.377Y41.89
X40.71Y41.476
X41.587Y40.678
X41.973Y40.422
X42.427Y40.196
X42.771Y40.037
X43.352Y39.879
X43.57Y39.804
X44.368Y39.724
X45.166Y39.676
X51.73
X65.918
X66.135Y39.694
Y40.678
Y49.993
G00Z10.
M09
M05
M30
%
(Time: 39.88MIN)

dddddddddddddddddddddddddddddddddd

ddd

hjhjhjhj

谢谢!

晕，我用不了

为什么要5分?真气人.

感谢 感谢 非常感谢哈哈

qsy1978 wrote:
如果每行前再加上序列号就更漂亮。

#=============================================================
proc PB_start_of_program { } {
#=============================================================
  
   if [llength [info commands PB_CMD_kin_start_of_program] ] {
     &nbspB_CMD_kin_start_of_program
   }
  
   MOM_set_seq_off
   MOM_set_seq_off在此段上这句话,激活行号
   MOM_force Once Text
   MOM_do_template absolute_mode_1
  &nbspB_CMD_start_of_path
   MOM_do_template absolute_mode_1_1
   MOM_do_template absolute_mode
   MOM_do_template absolute_mode_2
}