在Proe里面直接打印工程图的问题

请教大侠们
在Proe里面直接打印工程图时要如何设置啊,
我打印出来的图不是不在中心就是偏边啊,还有里面的线条细宽该如何设置啊.

望能具体的说明下,或传一打印的table文件什么的.
谢谢先了.

急啊,

请教啊,不然的话,每次出图都要先转化为DWG格式,那也太麻烦了啊。

线型大小如下:
ztable.pnt

! This is a pen table file.  See Interface Guide under "pen mapping".

! Pen 1 = white entities (object lines)
! Pen 2 = yellow entities (text, dimensions, cross hatching)
! Pen 3 = gray entities (hidden lines)
! Pen 4 = red entities (can use for drawing border if you change the
! entity color to red in the format file)
! Pen 5 = green entities (sheetmetal)
! Pen 6 = cyan entities (section)
! Pen 7 = dark gray entities (dimmed)
! Pen 8 = blue entities (spline surface grid)


pen 1 thickness .018 cm; drawing_color
pen 2 thickness .01 cm; letter_color
pen 3 thickness .009 cm; half_tone_color
pen 4 thickness .005 cm; highlite_color
pen 5 thickness .005 cm; color 0 0 0
pen 6 thickness .005 cm; color 0 0 0
pen 7 thickness .02 cm; color 0 0 0
pen 8 thickness .02 cm; color 0 0 0

2005-10-15 10:13  [信息]  [悄悄话]   [编辑]  [引用]  [报告]  [搜索]    第 4 楼  

--------------------------------------------------------------------------------
线型大小如下:
table.pnt这样设置

! This is a pen table file.  See Interface Guide under "pen mapping".

! Pen 1 = white entities (object lines)
! Pen 2 = yellow entities (text, dimensions, cross hatching)
! Pen 3 = gray entities (hidden lines)
! Pen 4 = red entities (can use for drawing border if you change the
! entity color to red in the format file)
! Pen 5 = green entities (sheetmetal)
! Pen 6 = cyan entities (section)
! Pen 7 = dark gray entities (dimmed)
! Pen 8 = blue entities (spline surface grid)


pen 1 thickness .018 cm; drawing_color
pen 2 thickness .01 cm; letter_color
pen 3 thickness .009 cm; half_tone_color
pen 4 thickness .005 cm; highlite_color
pen 5 thickness .005 cm; color 0 0 0
pen 6 thickness .005 cm; color 0 0 0
pen 7 thickness .02 cm; color 0 0 0
pen 8 thickness .02 cm; color 0 0 0

然后在config.pro加上

pen_table_file E:\LHH\TABLE.PIN

E:\LHH\表示路径，

上面pen 1 thickness .018 cm; drawing_color 中.018 cm表示线型大小单位cm,.

我不会贴图，要不就详细点。如还不明白请：ling888168@163.com    也可以QQ：
453559657