it版打开很多面的图档做刀路中出现如下提示

渲染时也有，怎么解决啊，急救

1:可以用BLANK功能
2：可以用组，层功能

没见过

你在翩程所選的面超過了 cimatron 里所限制的最大數.....建議你把某些面組合起來.....應該可以解決你的問題.....記得原有的面復製多一分...以免有問題是不會遺失原來的面......

你在翩程所選的面超過了 cimatron 里所限制的最大數.....建議你把某些面組合起來.....應該可以解決你的問題.....可以及的八原有的面復製多一分...以免有問題是不會遺失原來的面......

谢谢楼上各位.我在官方论坛上找到如下文字,英文好的帮忙看看
  
The problem here is that every time we update a section view we are writing the hatch data to the pfm file drafting keeps and we don't delete it. After a lot of update operation the pfm file grows until the upper limit of entities.  
This file is not corrupted and the user can save it. He needs to find the name of the pfm file in the data directory ( you can see the path of the file in the DM browser and the name if the exl file will be also the name of the pfm file). The next phase is to copy the file standard.pfm from cimatronE/cimE/it/dat/defdata directory and change the name to the name of the original pfm file.  
With these operations we replaced the original pfm file with the standard pfm file. You don't need to worry about the data in the pfm file. We are using the pfm file only for users that have old IT frames (and we have some).  
After the change the user will be able to open the file and update it.

用哪个指令组合起来？